Chauvet DMX-40B User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
PHYSICAL FADER ASSIGNMENT (OPTIONAL SETUP)
Use this feature to combine or unify fixture control attributes for different fixtures. For example; if you
were controlling 4 moving mirrors and 4 moving yokes, the color, gobo and dimmer channels may not
line up ideally on the physical faders. Use this function to re-assign the dimmer, color and gobo
channels to faders 1, 2 and 3. From now on you will be able to control the same attributes on all
fixtures using the same fader location.
Action
1) Press and hold PROGRAM & TAPSYNC
buttons together (1) time to access the
channel assignment mode.
2) Press a SCANNER button that represents
the fixture whose faders you would like to
re-assign.
3) Move the SPEED fader until you arrive at
controller channel (number).
4) Move the FADE TIME fader to select the
DMX channel.
5) Press the MIDI/ADD button to confirm
setting.
6) Repeat steps 3 ~ 5 as often as necessary.
If you wish to copy a scanner’s physical
assignments to another scanner, continue by
following steps 7-13. If you do not wish to do this,
press and hold PROGRAM & TAPSYNC buttons
(2) times to exit mode.
Example: Copying Scanner 1 into
Scanner 2
7) Press and hold SCANNER button # 1.
8) While holding button # 1 press SCANNER
button # 2.
9) While holding SCANNER buttons # 1 and #
2, press and hold MIDI/ADD button.
10) Release SCANNER button # 1 first before
releasing SCANNER button # 2.
11) Release MIDI/ADD button.
12) All SCANNER LED indicators will flash to
confirm successful copy.
13) Press and hold PROGRAM & TAPSYNC
buttons (2) times to exit mode.
Notes
All physical faders can be re-assigned to output on a
different DMX channel. Faders are given a channel
number and are labeled on the surface of the
controller as such.
DMX-40B User Manual 9 Revised: 2006-12-06 09:36:47
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Comments to this Manuals

No comments