Operation
-8- COLORado™ Range IP User Manual Rev. 7
4. Operation
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<SET>
Enables the currently displayed menu or
sets the currently selected value in to the
current function
<UP>
Navigates upward through the menu list and
increases the numeric value when in a
function
<DOWN>
Navigates downward through the menu list
and decreases the numeric value when in a
function
You can set the COLORado™ Range IP start address in the 001~512 DMX range. This
enables control of up to 32 units in the 16-channel TOUR personality.
Programming
Refer to the Menu Map on page 14 to learn how the menu options relate to each other.
The Menu Map has a Main Level and a variable number of programming levels for each
option.
To go to an option in the Main Level, press <MENU> repeatedly until the option shows on
the display. Press <SET> to select it. This will take you to the first programming level for
that option.
To select an option or value within the current programming level, press <UP> or <DOWN>
until shown on the display. Press <SET> to accept. If there is another programming level,
you will see its first option. Otherwise, you will see the selected value.
To exit to the previous menu level, press <MENU>.
DMX Personality
This setting enables the user to choose a particular DMX personality.
1. Go to PERS.
2. Select the desired personality (TOUR, ARC1, AR1 + D, ARC3, AR3 + D, AR3 + S,
HSV, or BLOC).
• See the DMX Values section for the highest starting address you can select for
each personality.
• Make sure that the starting addresses on the various units
the new personality setting. See the DMX Values section.
Comments to this Manuals