Chauvet ColorDash Batten-Quad 12 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Setup
COLORdash™ Batten-Quad 12 User Manual Rev. 4 -7-
Power Linking
The COLORdash™ Batten-Quad 12 supports power linking. You can power link up to 9
products at 120 V, 16 at 208 V, or 17 at 230 V.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
DMX Linking
You can link the COLORdash™ Batten-Quad 12 to a DMX controller using a standard
DMX serial connection. If using other DMX compatible products with the
COLORdash™ Batten-Quad 12
, you can control each individually with a single DMX
controller.
DMX Modes
The COLORdash™ Batten-Quad 12 uses the standard DMX data connection for the 4,
6, 10, 48, and 52 channel DMX modes.
Refer to the Introduction chapter for a brief description of these modes.
Refer to the Operation chapter to learn how to configure the
COLORdash™ Batten-Quad 12 to work in these modes.
The DMX Values section provides you with detailed information regarding the
DMX modes.
Master/Slave
Connectivity
The Master/Slave mode allows a COLORdash™ Batten-Quad 12 (the “master”) to
control one or more COLORdash™ Batten-Quad 12s (the “slaves
”) without a DMX
controller. One COLORdash™ Batten-Quad 12
becomes the master when running an
auto program or by being in Static mode.
You must configure each slave product’s control panel to operate in Slave
mode. During
Master/Slave operation, the slave products will operate in unison with the master
product.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The Operation section of this manual provides detailed instructions on how to
configure the Master and Slaves.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX
controller, download the DMX Primer from the Chauvet
website:
www.chauvetprofessional.com.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Comments to this Manuals

No comments