Chauvet HURRICANE 1100 User Manual download pdf (Page 9)

Hurricane™ Haze 2D User Manual (Rev. 7) Page 9 of 14

4. OPERATION

Control

Panel

Operation

To access the control panel functions, use the four buttons located underneath the

display.

Button Function

<MENU>

Press to scroll through the

operating modes

<UP> Press to find a higher value

<DOWN> Press to find a lower value

Important note regarding the priority level for the three types of methods used

to control the operation of your Hurricane™ Haze 2D.

If using the remote control and the digital display is touched, the digital display will

take priority control. If using the digital display, and then connect the product to a

DMX controller, the DMX will take priority control. The priority control levels are:

1. DMX

2. Digital display

3. Remote controller

Remote

Operation

Important: Using the Control Board, set the Fan and Haze output to 0. You can then

connect and operate the remote with the Hurricane™ Haze 2D.

Menu Map

Mode Programming Steps Description

DMX Mode d*** 001~512 Selects the DMX starting address

Manual Mode

Haze Volume h001~h005 Low~high

Blower Speed

f001~f005

Low~high

Configuration

(DMX)

Set this product in DMX mode to control it with a DMX controller.

1. Connect this product to a suitable power outlet.

2. Turn this product on.

Connect a DMX cable from the DMX output of the DMX controller to the

DMX input socket of this product.

Starting

Address

The Hurricane™ Haze 2D has one DMX personality, a 2-

channel mode for basic

control.

The Hurricane™ Haze 2D uses up to two channels in its 2-channel DMX mode, which

defines the highest configurable address to 511.

When

selecting a starting DMX address, always consider the number of DMX

channels the selected DMX mode uses. If you choose a starting address that is too

high, you could restrict the access to some of the product’s channels.

If you are not familiar with the DMX protocol, download the DMX Primer from

www.chauvetlighting.com.

To select the starting address, do the following:

1. Press <MENU> repeatedly until d*** shows on the display.

2. Use <UP> or <DOWN> to select the starting address.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Chauvet HURRICANE 1100 User Manual Page 9

Comments to this Manuals

Related products and manuals for Floodlights Chauvet HURRICANE 1100