Chauvet LEDsplash 152B User Manual download pdf (Page 9)

LED-PAR83 User Manual 9 2005-09-29/19:19

Set the start address using the group of DIP switches located usually on bottom of the fixture. Each

dip switch has an associated value. Adding the value of each switch in the ON position will provide

the start address. Determining which switches to toggle ON given a specific start address can be

accomplished in the following manner. By subtracting the largest switch value possible from the

selected start address until zero is achieved.

EXAMPLE STARTING ADDRESS

Address 10

Pin # 4 = 8

Pin # 2 = 2

Total = 10

Address 24

Pin # 5 = 16

Pin # 4 = 8

Total = 24

Resolving address using

simple math.

Address 233

233 – (128) = 105, Turn ON Dip # 8

105 – (64) = 41, Turn ON Dip # 7

41 – (32) = 9, Turn ON Dip # 6

9 – (8) = 1, Turn ON Dip # 4

1 – (1) = 0, Turn ON Dip # 1

You will most likely use the first

available number which maybe

number 1. This number was

selected for example purposes.

DIP SWITCH (DMX VALUE)

128

256

128

256

OPTION

128

256

OPTION

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Chauvet LEDsplash 152B User Manual Page 9