Chauvet ORB User Manual download pdf (Page 9)

Orb™ User Manual (Rev. 01a) Page 9 of 17

Configuration (Standalone Modes)

Set this product in one of the standalone modes to control it without a DMX controller.

1) Connect this product to a suitable power outlet.

2) Turn this product on.

Sound Active Mode

To enable the Sound Active mode, do the following:

1) Set DIP switch [9] to the ON position.

2) Turn the music on and adjust the microphone sensitivity knob until the fixture

starts reacting to the beat of the music.

The fixture will only respond to the low frequencies of the music (bass and

drums).

Automatic Mode

Never connect a fixture that is operating in any standalone mode, whether

Static, Automatic, or Sound to a DMX string connected to a DMX controller.

This is because fixtures in standalone mode may transmit DMX signals that

could interfere with the DMX signals from the controller.

To enable the Automatic Mode, follow the instructions below:

1) Set DIP switch [8] to the ON position.

Manual Mode

To enable the Manual mode, do the following:

1) Set DIP switches [8~10] to the OFF position.

2) Use the following chart to combine DIP switches [1~7] to create a manual action.

DIP switch

Function

Red

Green

Blue

No function

Strobe (slow)

Strobe (fast)

Strobe & rotation (all colors)

The red, green, & blue DIP switches can be combined with the Strobe

(slow/fast) DIP switches.

DIP switch [6] overrides DIP switch [5].

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Chauvet ORB User Manual Page 9