EN OVATION™ E-190WW QRG
3
Included
• PowerCON® Input Cord
•
• Quick Reference Guide
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 4 OVATION™ E-190WW products at 120 VAC or 7 at
230 VAC. Power linking cords can be purchased separately.
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3. Remove blown
fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The OVATION™ E-190WW will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available f
The OVATION™ E-190WW uses a regular DMX data connection for its
DMX personalities: UNO, DOS, and STD.P. See the User
Manual to
connect and configure for DMX operation.
The OVATION™ E-190WW allows control of other OVATION™
E-190WW products
using a regular DMX data connection. See the User
Manual to configure for Master Control operation.
Connection
The OVATION™ E-190WW uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Comments to this Manuals