Chauvet Ovation F-95WW User Manual download pdf (Page 7)

Before You Begin

-2- OVATION™ F-95WW User Manual Rev. 4

Safety Notes

Read all the following Safety Notes before working with this product. These notes

include important information about the installation, usage, and maintenance of this

product.

This product contains no user-serviceable parts. Any reference to servicing in

this User Manual will only apply to properly trained Chauvet certified

technicians. Do not open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this

product.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Always disconnect this product from its power source before servicing.

• Always connect this product to a grounded circuit to avoid the risk of electrocution.

• Do not touch this product’s housing during operation because it may be very hot.

Mounting and

Rigging

• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not

expose this product to rain or moisture.

• CAUTION: When transferring product from extreme temperature environments,

(e.g. cold truck to warm humid ballroom) condensation may form on the internal

electronics of the product. To avoid causing a failure, allow product to fully

acclimate to the surrounding environment before connecting it to power.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm)

from adjacent surfaces.

• Make sure there are no flammable materials close to this product while it is

operating.

• When hanging this product, always secure to a fastening device using a safety

cable (included).

Power and Wiring

• Always make sure you are connecting this product to the proper voltage in

accordance with the specifications in this manual or on the product’s specification

label.

• Never connect this product to a dimmer pack or rheostat.

• Never disconnect this product by pulling or tugging on the power cable.

Operation

• Do not operate this product if you see damage on the housing, lenses, or cables.

Have the damaged parts replaced by an authorized technician at once.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product

at a higher temperature.

• In case of a serious operating problem, stop using this product immediately!

In the unlikely event that your Chauvet product may require service, contact

Chauvet Technical Support.

Expected LED

Lifespan

LEDs gradually decline in brightness over time, mostly because of heat. Packaged in

clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED

conditions. For this reason, using clustered LEDs at their fullest intensity significantly

reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be 90,000 to

100,000 hours. If extending this lifespan is vital, lower the operating temperature by

improving the ventilation around the product and reducing the ambient temperature to

an optimal operating range. In addition, limiting the overall projection intensity may also

help to extend the LEDs’ lifespan.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Chauvet Ovation F-95WW User Manual Page 7

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Ovation F-95WW