Chauvet Scorpion Storm RGX Operations Instructions download pdf (Page 13)

Scorpion™ Storm RGX User Manual 13 8/18/2011

This drawing provides a

general illustration of the

DMX Input/Output panel

of a lighting product.

Universal DMX Controller

Continue the link

Master Slave Slave

Often, the setup for Master-Slave and

Standalone operation requires that the

first product in the chain be initialized

for this purpose via either settings in the

control panel or DIP-switches.

Secondarily, the products that follow

may also require a slave setting. Please

consult the “Operating Instructions”

section in this manual for complete

instructions for this type of setup and

configuration

3-Pin to 5-Pin Conversion Chart

If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-

pin adapter. CHAUVET Model No: DMX5M, or DMX5F.

The chart below details a proper cable conversion.

PIN TO 5 PIN CONVERSION CHART

Conductor 3 Pin Female (output) 5 Pin Male (Input)

Ground/Shield Pin 1 Pin 1

Data ( - ) signal Pin 2 Pin 2

Data ( + ) signal Pin 3 Pin 3

Do not use Do not use

Setting Up a DMS Serial Data Link

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the

controller.

2. Connect the end of the cable coming from the controller

which will have a (female) 3 pin connector to the input

connector of the next product consisting of a (male) 3 pin

connector.

3. Then, proceed to connect from the output as stated

above to the input of the following product and so on.

CHAUVET Certified DMX Data Cables

Order Code Description

DMX1.5 DMX Cable 1.5m/4.9ft

DMX4.5 DMX Cable 4.5m/14.8ft

DMX10 DMX Cable 10m/32.8ft

Master/Slave Fixture Linking

1. Connect the (male) 3 pin connector side of the DMX

cable to the output (female) 3 pin connector of the first

product.

2. Connect the end of the cable coming from the first product which will have a (female) 3 pin connector to the

input connector of the next product consisting of a (male) 3 pin connector. Then, proceed to connect from

the output as stated above to the input of the following product and so on.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Chauvet Scorpion Storm RGX Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Scorpion Storm RGX