Chauvet Swarm4 User Manual download pdf (Page 9)

Swarm™ User Manual 9 4/23/2009 11:59 AM

This drawing provides a

general illustration of the

DMX Input/Output panel of

a lighting fixture.

Universal DMX Controller

Continue the link

Often, the setup for Master-Slave

and Standalone operation requires

that the first fixture in the chain be

initialized for this purpose via

settings in the control panel.

Secondarily, the fixtures that follow

may also require a slave setting.

Please consult the “Operating

Instructions” section in this manual

for complete instructions for this

type of setup and configuration.

Master

Slave

Setting up a DMX Serial Data Link

1. Connect the (male) 3 pin connector side of

the DMX cable to the output (female) 3 pin

connector of the controller.

2. Connect the end of the cable coming from

the controller which will have a (female) 3

pin connector to the input connector of the

next fixture consisting of a (male) 3 pin

connector.

3. Then, proceed to connect from the output

as stated above to the input of the following

fixture and so on.

CHAUVET Certified DMX Data Cables

Order Code Description

DMX1.5 DMX Cable 1.5m/4.9ft

DMX4.5 DMX Cable 4.5m/14.8ft

DMX10 DMX Cable 10m/32.8ft

Master/Slave Fixture Linking

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector

of the first fixture.

2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin

connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,

proceed to connect from the output as stated above to the input of the following fixture and so on.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Chauvet Swarm4 User Manual Page 9

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Swarm4