Chauvet WELL User's Guide download pdf (Page 3)

Lamp

ELC3 24V 250W (300 Hrs)

• Always switch off the main power supply and never handle the lamp or luminaire

when it is hot.

• Never touch the bulb with bare hands. Oils on your skin may greatly reduce the life

of the bulb.

• To insert a new lamp, remove the 4 screws on the side of the lamp cover. Insert

the new lamp into the socket and place into the lamp holder. Replace the 4 screws.

• Always use the type of lamp specified.

DMX Operation

Before connecting this unit to the main power supply for the first time you must first install the lamp. (See 'Replacing Lamps' for

details).

This lighting effect has been designed to function on a main power supply of 120V, 60Hz or 230V, 50Hz and has been fitted with

a suitable power plug.

The Omega II (DMX-255) is a DMX fixture that can be operated with CHAUVET's DMX-6, DMX-40, DMX-50, ShowXpress or

any other universal DMX controller. The unit will also work in stand alone mode sound activated. To operate in DMX mode, you

must link the units together using a premium quality 3-pin DMX cable in the following configuration. 'Out' from the first unit to 'In'

on the second, 'Out' from the second to 'In' on the third and so on.

The Omega II (DMX-255) is a 5 channel DMX fixture. Please consult the controller manual to determine the proper address for

the units.

Example: To set the address at 12

1.Set SW 10 to OFF.

2. Count the value of the switches in the on position.

and SW 4 equals 8.

3. Set SW 3 and SW 4 to the ON position. (4 + 8 = 12)

1 2 3 4 5 6 7 8 9

Off

Value

1 2 4 8 16 32 64

128 256

•Screws

1 2 3 4 5

No comments

Chauvet WELL User's Guide Page 3