Pro-D6 User Manual 9 8/12/2010 12:19 PM
Menu Functions
Speed time
Value=00.2s-20.0s
Select how the product will react if there is
no DMX detected
Start addr
Value=[001-512]
Select a DMX starting address
CH[01-06]
Value=[001-512]
Select a separate DMX address for each
channel
Select a preheat percentage for all
channels
CHAN[01-06]
Value=[000-050%]
Select a preheat percentage for each
channel independently
Select a maximum operation level for all
channels
CHAN[01-06]
Value=[000-100%]
Select a maximum operation level for each
channel independently
Select operation mode for all channels:
dimmer (0-100%) or relay (0/100%)
CHAN[01-06]
SWITCH-LINEAR
Select operation mode for each channel
independently: dimmer (0-100%) or relay
(0/100%)
Manually manipulate the output of all
channels simultaneously
CHAN[01-06]
Value=[000-100%]
Manually manipulate the output of each
channel independently
User Configurations
To set the DMX address
1) Select “Dmx address” by pressing <Menu>, then the <Up/Down> buttons, until the display
reads correctly.
2) Press <Menu> to reach the second step of the addressing menu.
3) Use the <Up/Down> buttons to select Block or Single mode.
4) Press the <Menu> button.
5) Use the <Up/Down> buttons to select the correct value. Once you are satisfied with your input,
press <Menu>to confirm your selection.
6) Pressing the <Esc> button will allow you to back out of this menu. This is useful if you wish to
select the option for setting each channel to a different dmx address.
Comments to this Manuals