Chauvet Scorpion Sky User Manual download pdf (Page 19)

Scorpion™ GBC EU/RBM EU/RGY EU/BLU EU User Manual (Rev. 4) Page 19 of 28

Continued from previous page

Reverse Motion

To reverse the direction of the pan and tilt motion, follow the instructions below:

1) Press <MENU> repeatedly until rEv shows blinking on the display.

2) Press <ENT> (the current option for pan direction will show (P-n or P-Y).

a) To change the setting, use <UP> or <DOWN> and continue to step “3”.

b) To keep the setting, continue to step “3”.

3) Press <ENT> (the current option for tilt direction will show (t-n or t-Y).

a) To change the setting, use <UP> or <DOWN> and continue to step “4”.

b) To keep the setting, continue to step “4”.

4) Press <ENT> (the current software version will show briefly on the display, followed

by rEv).

Master/Slave

Mode

This mode allows a single Scorpion™ GBC EU/RBM EU/RGY EU/BLU EU

fixture (the

“master”) to control the actions of one or more Scorpion™ GBC EU/RBM EU/RGY

EU/BLU EU units (the “slaves”) without the need of a DMX controller. The master unit

will be set to operate in either Automatic, Sound, or Laser Sky mode, while the slave

units will be set to operate in Slave Mode. Once set and connected, the slave units will

operate in unison with the master unit.

Configure the units as indicated below.

When working as a slave unit, the Scorpion™ BLU EU will duplicate all the effects

and movements of a Scorpion™ GBC EU, RBM EU, or RGY EU master unit, minus

the multiple colors.

Slave units:

1) Press <MENU> repeatedly until SLA shows blinking on the display.

2) Press <ENT> (SLA will show solid on the display).

3) Connect the DMX input of the first slave unit to the DMX output of the master unit

4) Connect the DMX input of the subsequent slave units to the DMX output of the

previous slave unit.

5) Finish setting and connecting all the slave units.

Master unit:

1) Set the master unit to operate in either, Automatic, Laser Sky, or Sound mode, as

previously indicated.

2) Make the master unit the first unit in the DMX daisy chain.

• Wait until all the slave units are configured and connected before connecting

the master unit to the DMX daisy chain.

• Never connect a DMX controller to a DMX string configured for Master/Slave

operation because it may interfere with the signals from the master unit.

Do not connect more than 31 slave units to the master unit.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Chauvet Scorpion Sky User Manual Page 19