User Manual
4. Operating Instructions 10 10/25/2010 10:23 AM Operation DMX Operation This is the operating mode which will allow for control with an ext
4. Operating Instructions 11 10/25/2010 10:23 AM Sound-Active This fixture has a preprogrammed, sound triggered chase. Access this via the c
4. Operating Instructions 12 10/25/2010 10:23 AM DMX Channel Values 11-CH Mode CHANNEL VALUE FUNCTION CHANNEL VALUE FUNCTION 1 000 Ù 255 Pan
4. Operating Instructions 13 10/25/2010 10:23 AM 7-CH Mode CHANNEL VALUE FUNCTION CHANNEL VALUE FUNCTION 1 000 Ù 255 Pan 0°~180° 6 000 Ù 015
5. Appendix 14 10/25/2010 10:23 AM 5. APPENDIX General Troubleshooting SYMPTOM POSSIBLE CAUSE(S) POSSIBLE ACTION(S) Breaker/Fuse keeps blowi
5. Appendix 15 10/25/2010 10:23 AM DMX Primer There are 512 channels in a DMX connection. A fixture capable of receiving DMX will require one o
5. Appendix 16 10/25/2010 10:23 AM Cable Connectors Cabling must have a male XLR connector on one end and a female XLR connector on the other
5. Appendix 17 10/25/2010 10:23 AM 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to u
5. Appendix 18 10/25/2010 10:23 AM General Maintenance To maintain optimum performance and minimize wear, fixtures should be cleaned frequently
TECHNICAL SPECIFICATIONS WEIGHT & DIMENSIONS Length ...
CHAUVET®, 2010, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no respo
CONTACT US World WideGeneral Information CHAUVET® 5200 NW 108th Ave Sunrise, FL 33351 voice: 954.929.1115 fax: 954.929.5560 toll free: 800.762
1. Before You Begin 3 10/25/2010 10:23 AM 1. BEFORE YOU BEGIN What is included • 1 x Intimidator™ Scan LED 300 • 1 x Mounting bracket kit
1. Before You Begin 4 10/25/2010 10:23 AM Safety Instructions • Please keep this User Manual for future consultation. If you sell the unit
2. Introduction 5 10/25/2010 10:23 AM 2. INTRODUCTION Product Dimensions
2. Introduction 6 10/25/2010 10:23 AM Product Overview Bracket Adjustment Knob DMX In DMX Out Power OutFuseholderPower InVoltage Selecti
3. Setup 7 10/25/2010 10:23 AM 3. SETUP AC Power This fixture is switchable and runs on either 115 VAC, 60 Hz or 230 VAC, 50 Hz power. Before
3. Setup 8 10/25/2010 10:23 AM Mounting Orientation The Intimidator™ Scan LED 300 may be mounted in any position provided there is adequate r
4. Operating Instructions 9 10/25/2010 10:23 AM 4. OPERATING INSTRUCTIONS Using the Control Panel Access control panel functions using the fo
Comments to this Manuals