Chauvet Hurricane User Manual download pdf (Page 13)

Hurricane™ Haze 2D User Manual Rev. 12 Page 13 of 16

5. Technical Information

Hazer Maintenance

Do not allow the hazer to become clogged. After every 40

hours of continuous

operation, use CHAUVET® Fog Cleaner Quart (FCQ) through the system to prevent

the accumulation of particulate matter in the heating element.

The recommended cleaning procedure is as follows.

1. Unplug the product from power.

2. Empty all fog fluid from the machine.

3. Add cleaning solution to the tank.

4. Connect the product to power and allow it to warm up.

5. Run the unit in a well-ventilated area until the tank is almost empty. Do not

allow the pump to run dry.

6. Refill with hazer fluid to continue using the hazer. Run the machine briefly to

clear any remaining cleaning solution from the pump and heater.

Do not operate the machine without fluid at any time.

Fog Cleaner Quart (FCQ) was specifically developed by Chauvet to clean your

Hurricane™ Haze 2D. Make sure you use FCQ regularly, no longer than 90 days

between cleanings, to increase the life of your product.

Storage

Before storing the hazer, run FCQ through the system as described in the cleaning

procedure above; however, only follow steps 1 through 5. Do not refill the tank with

fog fluid if storing the hazer. Cleaning the system prior to storage will help prevent

any particles from condensing inside the pump or heater while not in use.

Test-run your Hurricane™ Haze 2D

on a monthly basis to achieve the best

performance.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Chauvet Hurricane User Manual Page 13