Chauvet LED-CHVA User Manual download pdf (Page 6)

LED-T40A COLORtube™ 2.0 User Manual 6 2005-11-16/12:32

OPERATING INSTRUCTIONS

Overview

The COLORtube™ 2.0 is a one meter long tube containing 144 high intensity LEDs. Each tube has 4

leads: Signal in and power in on one end and signal out and power out on the other. The first tube

must be connected to the mains power via a power cable (LED-PC5A). The other tubes may be

powered via the power out cable limited only by the wattage available from the power outlet. The

COLORtube™ 2.0 can be run using the LED-CHVA COLORcontroller™ 2.0. Up to 1000 tubes may

be controlled by a single controller however a signal booster (LED-BOOSTA) is required for every 30

tubes.

Stand-Alone Operation

Immediately upon powering the COLORtube™ 2.0 will run a standard built in chase program. The

built-in stand-alone program will run in sync on other tubes connected in series without any additional

setup or settings. Please review the Connection Diagram on the page prior for instructions. If using

the optional LED-CHVA COLORcontroller™ 2.0, loss of power to the controller will also revert the

tube into its stand-alone operation.

1 2 3 4 5 6 7 8

No comments

Chauvet LED-CHVA User Manual Page 6