Chauvet LEGEND 550 User Manual download pdf (Page 10)

Legend™ 550 Spot User Manual 10 1/11/2010 11:36 AM

Lamp

You may have to install a lamp prior to the initial operation of the fixture. An MSI575 high

intensity discharge lamp is included.

Warning! When replacing the lamp, please wait 15 minutes after powering down to allow the unit to

cool down! Always disconnect from main power prior to lamp replacement.

Do not touch the envelope (glass area) of the bulb with bare hands. If this happens, clean the lamp

with alcohol and wipe it with a lint free cloth before installation.

Lamp Installation

1. Unscrew the 4 screws (S1) to detach the top cover.

2. Unscrew screws (S2) to remove lamp cover and

expose lamp compartment.

3. To remove the lamp, loosen both lamp end

screws (S3) to relieve the pressure from

the lamp socket slots. This way, you will be

able to slide the lamp freely upwards and

out of the lamp socket. Raise the lamp

evenly to remove it.

4. To install a new lamp, loosen both screws

on the double- ended lamp to allow the

lamp to slide into the lamp socket slots.

Lower the lamp evenly.

Warning! Make sure that the clips on the lamp socket

are toward the front of the fixture.

5. Before tightening the lamp end screws,

rotate the bulb until the nipple on the

envelope (N) of the bulb is facing upwards

as illustrated.

Front

Clip

Lamp end

screw

Lamp

envelope

Lamp

contact

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

No comments

Chauvet LEGEND 550 User Manual Page 10