Chauvet Q-Spot 150-LED User Manual download pdf (Page 14)

Operating Instructions

Q-Spot & Q-Spot 150 User Manual 14 2005-11-15/13:11

Segment Display Configurations

The display can be inverted making it easier to read the menu depending on the orientation of your

fixture.

PC - Display Invert

FUNCTION SET TO NOTES

PC -y Invert display

PC -n Return to normal

Service Functions

P7 - Fixture Reset (all motors)

This function will re-initialize the fixture by returning all motors to its startup positions or otherwise

known as (home position).

FUNCTION SET TO NOTES

P7 -y Reset fixture

P7 -n Skip function

Pb - Fixture Partial Reset (excludes Pan & Tilt)

This function will re-initialize the fixture with exception of the Pan and Tilt motors.

FUNCTION SET TO NOTES

Pb -y Reset fixture, excluding Pan & Tilt

Pb -n Skip function

H000 - Fixture Hours

The (fixture hours) readout displays the number of hours the fixture has been in use. It is not

uncommon to find new fixtures with a few logged hours. This means the fixture was thoroughly tested

prior to delivery.

1. Press the [Choose] button until the display reads “HNNN” where N represents a number from 0 to

2. The numbers represented are the hours of operation since last counter-reset.

Resetting Fixture Hours

1. Press the [Choose] button until the display reads “- - - -“.

2. Press and hold the [Enter] button.

3. Press the [Up] button then the [Down] button.

4. Action is confirmed by a “dEFA” on the read out display, followed by a fixture reset.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

No comments

Chauvet Q-Spot 150-LED User Manual Page 14