Chauvet Strike 324 User Manual download pdf (Page 14)

Operation

-10- STRIKE™ 324 User Manual Rev. 3

Static Operation

The Static mode allows the user to set the intensity and the strobe frequency from the

control panel without a DMX controller.

1. Go to the Static main level.

2. Select Dimmer.

• Choose desired intensity (000–255).

3. Select Strobe.

• Select the desired strobe frequency (000–255).

Auto Programs

Auto programs allow for control of pre-programmed strobe looks without a DMX

controller.

1. Go to the Auto main level.

2. Select the desired auto (Auto 0–7).

3. Select Speed.

4. Choose the desired speed value (

000–100

You cannot edit any of the auto programs (Auto 0–7).

Auto Test

This option allows you to test all the LEDs on the STRIKE™ 324.

1. Go to Info main level.

2. Select Auto > Test.

Master/Slave

The Master/Slave mode allows a group of STRIKE™ 324s (the slaves) to simultaneously

duplicate the output of another STRIKE™ 324 (the master) without a DMX controller.

1. Set each of the slaves:

a. Go to the M&S Mode main level.

b. Select Slave.

2. Set the master product:

a. Go to the M&S Mode main level.

b. Select Master.

c. Select an Auto or Static program as explained in Auto Programs

• The master is the one that runs a program whether in Auto or Static mode.

• Do not connect a DMX controller to the products configured for Master/Slave

operation. The DMX controller may interfere with signals from the master product.

• The master should be the first product in the daisy chain.

Software Information

This option shows what version of software the STRIKE™ 324 is running.

1. Go to the Info main level.

2. Select Version and the version number will show on the screen.

Temperature

This option shows the internal temperature of the STRIKE™ 324.

• Go to the Temp xx° C main level.

Backlight

This setting allows you to set the amount of time the backlight on the STRIKE™ 324

stays on after the last button is pressed on the control panel.

1. Go to the BackLite main level.

2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (30 seconds).

3. Press <ENTER>.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Chauvet Strike 324 User Manual Page 14

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Strike 324