Page 10 of 18 Intimidator™ Barrel LED 300 User Manual (Rev. 5)
4. OPERATION
To access the control panel functions, use the four buttons located
display. See the Product Overview to see the button locations on the control panel.
<MENU>
Press to find an operation mode or to back out of the current menu
option
Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
DMX Address 001-512 Sets the DMX starting address
Operation
Modes
SLAv (Son) Slave operating mode
Sound-Active mode
Automatic mode, fast program
NASl (SLoU) Automatic mode, slow program
Pan
Normal Pan operation
Inverse Pan rPAn Inverse Pan operation
Display
Normal
Display
Dis
Change the LED display text position
Inverse
Display
rDis
Channel Mode
11-Channel
Mode
11CH
Selects the DMX personality
8-Channel
Mode
8CH
Resets product
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Personalities
and
Address
The Intimidator™ Barrel LED 300 has two DMX personalities, from an 8 channel mode for
basic control to an 11-channel mode with more advanced control over the lights.
The Intimidator™ Barrel LED 300 uses up to 11 DMX channels in its highest
which defines the highest configurable address to 502.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that
restrict the access to some of the product’s channels.
If you are not familiar with the DMX protocol, download the DMX Primer
www.chauvetlighting.com.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until 8-CH or 11CH shows on the display.
2. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. Press <MENU> repeatedly until d001 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Comments to this Manuals