Chauvet Q-Wash 250 User Manual download pdf (Page 19)

Operation

Q-Wash™ 419Z-LED User Manual -15-

Zoom Position Adjust

This setting adjusts the position of the zoom lens outside the normal limits to allow for

tighter beam adjustment at longer distances.

1. Select SETTINGS > PERFORM > ZOOM POS.

a. Select BOOST to adjust the zoom lens for better focusing at longer distances

NORMAL

to use the factory settings.

Limit Pan/Tilt Range

1. Select SETTINGS > RANGE.

2. To set the start and end points of the pan and tilt ranges:

a. Select P.START and set the pan starting point between 000~255.

b. Select P.END and set the pan ending point between 000~255.

c. Select T.START and set the tilt starting point between 000~255.

d. Select T.END and set the tilt ending point between 000~255.

3. Select USE.

a. Select

YES

to activate the changes or

to cancel.

Offset Calibration

This option allows you to calibrate the starting points of the Pan, Tilt, and Zoom motors.

1. Select SERVICE > CALIB.M.

a. Select PAN.

i. Set the position value (000~255).

b. Select TILT.

i. Set the position value (000~255).

c. Select ZOOM.

i. Set the position value (

000~255

White Calibration

This setting allows you to select and edit the temperature of the white colors used in

channel 14 (Macros) when in the PERSON2 mode.

1. Select SERVICE > CALIB.C.

2. Select 3200K, 3400K, 4200K, 4900K, 5600K, 5900K, 6500K, 7200K, 8000K,

8500K, or 10000K.

3. Select RED, GREEN, BLUE, or WHITE.

a. Set the position value (000~255).

b. Repeat for the other colors.

4. Repeat for other color temperatures.

Calibrating the

White

Color

This setting allows you to calibrate the white color when SETTINGS > PERFORM >

COLOR is set to RGBtoW and the DMX controller’s red, green, and blue faders are set

to “255”.

1. Select SERVICE > CALIB.C.

2. Select RGBTOW

3. Select RED, GREEN, or BLUE.

a. Set the position value (000~255).

b. Repeat for the other colors.

When selecting SERVICE > CALIB.C > RGBTOW, you will only be able to define the

values of red, green, and blue.

The values of RED, GREEN, and BLUE configured from SERVICE > CALIB.C >

RGBTOW will define the color temperature shown when the RGB faders are set to “255”

if SETTINGS > PERFORM > COLOR > RGBtoW is active.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

Comments to this Manuals

No comments

Chauvet Q-Wash 250 User Manual Page 19

Comments to this Manuals

Related products and manuals for Stroboscopes & disco lights Chauvet Q-Wash 250