Intimidator™ Beam LED 350 User Manual Rev. 3 Page 11 of 19
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Intimidator™ Beam LED 350 uses up to 14 DMX channels in 14-CH DMX mode,
which defines the highest configurable address to 499.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com
.
To select the starting address, do the following:
1. Press <MODE/ESC> repeatedly until d001 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
3 Color Wheel
Color cycling rainbow with increasing speed
Reverse color cycling rainbow with increasing speed
4 Gobo Wheel
Animation effect (static)
Animation speed (slow to fast)
Gobo 5 shake, from slow to fast
Gobo 4 shake, from slow to fast
Gobo 3 shake, from slow to fast
Gobo 2 shake, from slow to fast
Gobo 1 shake, from slow to fast
Cycle effect with increasing speed
Reverse cycling effect with increasing speed
Comments to this Manuals