Chauvet Intimidator COLOR LED User Manual download pdf (Page 4)

Page 4 of 19 Intimidator™ Beam LED 350 User Manual Rev. 3

Product at a

Glance

Use on Dimmer

Auto Programs

Outdoor Use

Auto-ranging Power Supply

Sound-Activated

Replaceable Fuse

DMX

User-Serviceable

Master/Slave

Safety Notes

These notes include important information about the mounting, usage, and maintenance

of this product; read before using the product.

• This product is not intended for permanent installation.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Always disconnect the product from the power source before cleaning or replacing

the fuse.

• Avoid direct eye exposure to the light source while the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect the product from power by pulling or tugging on the cord.

• If mounting the product overhead, always secure to a fastening device using a

safety cable.

• Make sure there are no flammable materials close to the product when operating.

• Do not touch the product’s housing when operating because it may be very hot.

• Always make sure that the voltage of the outlet to which you are connecting the

product is within the range stated on the decal or rear panel of the product.

• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not

expose the product to rain or moisture.

• Always mount this product in a location with adequate ventilation, at least 20 in

(50 cm) from adjacent surfaces.

• Be sure that no ventilation slots on the product’s housing are blocked.

• Never connect the product to a dimmer.

• Make sure to replace the fuse with another of the same type and rating.

• Never carry the product from the power cord or any moving part. Always use the

handles.

• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the

product at higher temperatures.

• In the event of a serious operating problem, stop using the product immediately.

• Never try to repair the product. Repairs carried out by unskilled people can lead to

damage or malfunction. Contact the nearest authorized technical assistance center.

• This product is not intended for permanent installation.

• Keep this User Manual for future use. If you sell the product

to another user, be

sure to give this document to the next owner.

1 2 3 4 5 6 7 8 9 ... 18 19

Comments to this Manuals

No comments

Chauvet Intimidator COLOR LED User Manual Page 4

Comments to this Manuals

Related products and manuals for DJ controllers Chauvet Intimidator COLOR LED