Chauvet Intimidator COLOR LED User Manual download pdf (Page 15)

Intimidator™ Spot LED 350 User Manual Rev. 7 Page 15 of 20

Configuration

(Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

1. Connect the product to power.

2. Turn the product on.

Never connect a product that is operating in any standalone mode (either

Automatic or Sound-Active)

to a DMX string connected to a DMX controller.

Product

s in standalone mode may transmit DMX signals that could interfere with

the DMX signals from the controller.

Sound-Active

Mode

To enable the Sound-Active mode, do the following.

1. Press <MODE/ESC> repeatedly until one of the following shows on the display:

NASl, NAFA, NStS, SLAv

2. Press <UP> or <DOWN> to select NStS.

3. Press <ENTER>.

The product will only respond to low frequencies of music (bass and drums).

Automatic Mode

To enable the Automatic mode:

1. Press <MODE/ESC> repeatedly until one of the following shows on the display:

NASl, NAFA, NStS, SLAv

2. Press <UP> or <DOWN> to select NASl (for a slow light show) or NAFA (for a fast

light show).

3. Press <ENTER>.

Manual Pan/Tilt

Operation

To select whether you want the Intimidator™ Spot LED 350 to operate with normal

panning or inverted panning, do the following.

1. Press <MODE/ESC> repeatedly until PAn shows on the display.

2. Press <UP> or <DOWN> to select normal pan operation (PAn) or inverse pan

operation (r PAn).

3. Press <ENTER>.

To select whether you want the Intimidator™

Spot LED 350 to operate with normal tilting

or inverted tilting, do the following:

1. Press <MODE/ESC> repeatedly until tiL shows on the display.

2. Press <UP> or <DOWN> to select normal pan operation (tiL) or inverse pan

operation (r tiL).

3. Press <ENTER>.

Pan/Tilt Angle

Range

You are able to select the range for the pan and tilt angles on the Intimidator™ Spot

LED 350 to achieve the effect you like.

To select which pan angle range to use, do the following.

1. Press <MODE/ESC> repeatedly until PA54 shows on the display.

2. Press <UP> or <DOWN> to select 540° (PA54), 360° (PA36), or 180° (PA18).

3. Press <ENTER>.

To select which tilt angle range to use, do the following.

1. Press <MODE/ESC> repeatedly until Ti27 shows on the display.

2. Press <UP> or <DOWN> to select 270° (Ti27), 180° (Ti18), or 90° (Ti 9).

3. Press <ENTER>.

Display

You are able to flip the LED display for easy readability in any mounting situation.

To select your display angle:

1. Press <MODE/ESC> repeatedly until diS shows on the display.

2. Press <UP> or <DOWN> to select normal display mode (diS) or inverse display

mode (r diS).

3. Press <ENTER>.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Chauvet Intimidator COLOR LED User Manual Page 15

Comments to this Manuals

Related products and manuals for DJ controllers Chauvet Intimidator COLOR LED