Chauvet Atmos User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
Before You Begin
-2- Atmos™ User Manual Rev. 2
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained Chauvet
certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be very hot.
Do not drink or become in contact with the fog fluid. If you do, call your local emergency
service (911 in the US) for help.
Mounting And
Rigging
This product is not intended for permanent installation.
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose
this product to rain or moisture.
CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
Make sure there are no flammable materials close to this product while it is operating.
When hanging this product, always secure to a fastening device using a safety cable
(not included).
Power And
Wiring
Make sure the power cord is not crimped or damaged.
Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation
Do not operate this product if you see damage to the housing, fluid tank, or cables. Have
the damaged parts replaced by an authorized technician at once.
Be sure that no ventilation slots on the product’s housing are blocked.
Never carry the product from the power cord or any moving part. Always use the handles.
The fog exits the nozzle at a very high temperature. Keep a minimum distance of
6.5 ft (2 m) from the nozzle to the nearest object.
The product’s nozzle is very hot during operation and it remains hot for a long time after
operation has stopped.
The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at a
higher temperature.
In the event of a serious operating problem, stop using this product immediately!
Do not add perfume, alcohol, gasoline, or any other flammables to the fog fluid.
Only use Chauvet water-based High Density Fog Fluid (HDF) and Quick Dissipating Fog
Fluid (QDF).
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Comments to this Manuals

No comments