COLORado™ 2-Quad Zoom IP QRG EN
3
The COLORado™ 2-Quad Zoom IP will work with a DMX controller using a
regular DMX serial connection.
A DMX Primer is available from
www.chauvetpro.com.
The COLORado™ 2-Quad Zoom IP uses a regular DMX data connection for
its DMX personalities: TOUR, TR16, STD.Y, ARC.1, AR1.D, ARC.2
AR2.D, AR2.S, AR2.Z, and HSV
. See the User Manual to connect and
configure for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16
and STD.Y personalities, be sure that both dimming curves in SET > DIM
and SET > CURV are set to OFF.
The COLORado™ 2-Quad Zoom IP uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Product
Mounting
Diagram
Description
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the
currently selected value into the selected function
<UP>
Navigates upwards through the menu list or increases
the numeric value when in a function
<DOWN>
Navigates downwards through the menu list or
decreases the numeric value when in a function
After being prompted, enter the following passcode by pressing:
• <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
Secure the safety cable using
the
safety cable loop on the
CLP-15
CH-05
Comments to this Manuals