Chauvet COLORado Range IP User Manual download pdf (Page 12)

Setup

-8- COLORado™ 1-TRI IP User Manual Rev.2

Mounting

Before mounting this product, read and follow the Safety Notes in this manual.

Orientation

Always mount this product in a safe position and make sure there is adequate room for

ventilation, configuration, and maintenance.

Rigging

The COLORado™ 1-TRI IP consists of a double-bracketed yoke and the body of the

product. CHAUVET®

recommends using the following general guidelines when

mounting this product.

• When selecting an installation location, consider easy access to this product for

operation, programming adjustments, and routine maintenance.

• Make sure to mount this product away from any flammable material as indicated in

the Safety Notes

• Never mount in places where rain, high humidity, extreme temperature changes, or

restricted ventilation may affect the product.

• If hanging this product, make sure that the mounting location can support the

product’s weight. Refer to the Technical Specifications

for the weight-bearing

requirements of this product.

• When hanging this product, always secure to a fastening device using a safety cable

(included).

Procedure

The COLORado™ 1-TRI IP comes with a multi–purpose yoke to which you can either

attach mounting clamps for hanging, or attach to the floor for

use as a floor stand. You

must supply your own mounting clamps. Make sure the clamps are capable of

supporting the weight of this product.

Diagram

Floor Mounting

Overhead Mounting

Secure the safety cable using the

passageway on the back of the fixture.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Chauvet COLORado Range IP User Manual Page 12