Operation
-14- COLORado™ 1-TRI IP User Manual Rev.2
This setting allows you to select and edit the temperature of the white colors used in
channel 6 (Macros) when in the TOUR mode or channel 10 in TR16. mode.
1. Go to the CAL main level.
2. Enter the master access password as described in Control Panel Lock
3. Go to CAL1.
4. Select a white color (wT.01~11).
5. Select a color: R. (red), G. (green), b. (blue).
6. Select a color value (000~255).
7. Repeat for the other colors.
This setting allows you to select the white color shown by the COLORado™ 1-TRI IP
when the color setting is RGBW
and the DMX controller’s Red, Green, and Blue faders
are set to “255.”
1. Go to the CAL main level.
2. Enter the master access password as described in Control Panel Lock
3. Go to CAL2.
4. Select a color (RED, GREN, or BLUE).
5. Select a color value (000~255).
6. Repeat for the other colors.
When selecting CAL > CAL2 > RGBw., you will only be able to define the values of
RED, GREN (green), and BLUE.
The values of RED, GREN (green), and BLUE configured from CAL > CAL2 >
RGBw.
will define the color temperature shown when the RGB faders are set to
“255” if SET > COLO. > RGBw. is active.
This setting allows you to select the classic (01~20 Hz) strobe or special
(random/slow/fast) strobe personalities.
1. Go to the SET main level.
2. Go to STRB..
3. Select a strobe personality (CLAS. or SPEC.).
Comments to this Manuals