Chauvet COLORdash Par User Manual download pdf (Page 16)

COLORdash™ Par User Manual 16 9/4/2008 12:09 PM

Upload Customs

The custom programs in the COLORdash™ Par may be transferred (copied) from one fixture to another, thus

giving the ability to have to only program them on a single fixture, and then duplicate this only several others.

This is referenced in the Control Panel as “Upload”. Follow the below steps for this process. On all fixtures that

are going to receive the upload, set them on DMX operation. The address does not matter for this operation.

1. Disconnect from DMX controller

2. Select “Settings” in the Control Board and press Enter.

3. Select “Upload Customs” and press enter.

4. Press enter. The “customs” portion of the screen will begin to flash. Press enter to confirm and begin

the transfer.

5. The slave fixtures will display green if the transfer is successful. They will display red if the transfer

is unsuccessful.

Note: the units receiving the new custom programs from the master must be set to

“SLAVE”. Otherwise, they will not allow receipt of the programs.

Menu Map

MAIN FUNCTION

SUB-FUNCTION

SELECTION

INSTRUCTION

1. Static Color

Red

000 ~ 255*

(0 ~ 100%)

*Strobe range is

0~20

User can combine Red, Green and Blue

to generate a custom color

Select strobing frequency between 0

and 20Hz

Green

Blue

Strobe

2. Auto

Auto

(1~10)

Choose from 10 automatic programs

Custom

(1~10)

Choose from 10 programs that be

customized under the “edit custom”

menu option

3. DMX Address

001 ~ 512

Sets the DMX starting address

4. Run

DMX~Slave

Sets the operating mode for the fixture:

to receive signal from a DMX controller

(DMX) or to receive signal from the DMX

out of another fixture

5. Personality

Stage 1

9-channel RGBW+D

Arc 1

3-channel RGB

Arc 1+D

4-channel RGB+D

6. ID Address

0-66

Assigns the ID address to a fixture

7. Edit Custom

Custom (1~10)

-(Scene 01-30)

Red

User can combine Red, Green and Blue

to generate a custom color (0~255)

Green

Blue

Strobe

Select strobing frequency (0 ~20Hz)

Time

(0~255)

Fade

(0~255)

8. Settings

On~Off

Turns ID addressing on or off

Reset to factory?

(Press enter 2 times)

Resets the fixture to the default, factory

settings

Upload custom?

(Press enter 2 times)

Uploads a fixture’s custom program to

another fixture (same fixture only)

19. Password

On~Off

Turns the password on or off (after 30s

of no action, the password will

automatically turn on after selecting On)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

Chauvet COLORdash Par User Manual Page 16

Comments to this Manuals

Related products and manuals for Floodlights Chauvet COLORdash Par