Chauvet COLORdash Par User Manual download pdf (Page 4)

COLORdash™ Par User Manual 4 9/4/2008 12:09 PM

Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage, and that the line voltage you are

connecting to is not higher than that stated on the decal or rear panel of the fixture.

The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent

surfaces. Be sure that no ventilation slots are blocked.

Always disconnect from power source before servicing or replacing lamp or fuse and be sure to

replace with same lamp source.

Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use

its carrying handles.

Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate fixture at temperatures higher

than this.

In the event of a serious operating problem, stop using the unit immediately. Never try to repair the

unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always use the same type spare parts.

Never connect the device to a dimmer pack.

Make sure the power cord is never crimped or damaged.

Never disconnect the power cord by pulling or tugging on the cord.

Avoid direct eye exposure to the light source while it is on.

Do not daisy chain power to more than 25 units @120volts.

Caution! There are no user serviceable parts inside the unit. Do not open the housing or

attempt any repairs yourself. In the unlikely event your unit may require service,

please contact CHAUVET at: 954-929-1115.

Note! Power linking may not be available for 230V versions

Caution! After prolonged periods of operation, the fixture chassis may reach high

temperatures. Use caution when handling this fixture.

LED Expected Lifespan

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the

acceleration of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in

ideal or singular optimum conditions. For this reason when all color LEDs are used at their fullest

intensity, life of the LEDs is significantly reduced. It is estimated that a viable lifespan of 40,000 to

50,000 hours will be achieved under normal operational conditions. If improving on this lifespan

expectancy is of a higher priority, place care in providing for lower operational temperatures. This

may include climatic-environmental and the reduction of overall projection intensity

Please read these instructions carefully, which includes important

information about the installation, usage and maintenance of this

product.

1 2 3 4 5 6 7 8 9 ... 31 32

No comments

Chauvet COLORdash Par User Manual Page 4