Page 12 of 48 EZMiN™ Laser FX/RBX User Manual Rev. 3
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes
.
Orientation
The EZMiN™ Laser FX/RBX must be mounted in a position that includes planning for
safe laser usage. In addition, make sure adequate ventilation is provided around the
product.
Rigging
• Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product can
support the product’s weight (see the Technical Specifications
).
• When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The double-bracketed yoke has 13-mm holes, which
are appropriate for this purpose.
• The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
• The included flexible tripod serves as a surface support. See Proper Usage
.
Do not remove the bracket at any time. This product is intended to be used with its
bracket.
Comments to this Manuals