Chauvet Legend 412 User Manual download pdf (Page 10)

Setup

-6- Legend™ 412Z User Manual Rev. 4

3. SETUP

AC Power

Each Legend™ 412Z has an auto-ranging power supply that works with an input voltage range

of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Legend™ 412Z

refer to the label affixed to the product. You can also refer to the Technical Specifications

chart

in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more

information, you may download Sizing Circuit Breakers from the Chauvet website

www.chauvetprofessional.com.

• Always connect this product to a protected circuit with an appropriate electrical

ground to avoid the risk of electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug

The Legend™ 412Z comes with a Neutrik® powerCON A connector on one end and an Edison

plug on the other end (US market). If the power cord adapter that came with your product has

no plug or you need to change the Edison plug, use the table below to wire the new plug..

Connection

Wire (U.S.)

Wire (Europe)

Screw Color

AC Live

Black

Brown

Yellow or Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green

Fuse

Replacement

1. Disconnect this product from the power outlet.

2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with another fuse of the same type and rating

(T 6.3 A, 250 V).

4. Screw the fuse holder cap back in place and reconnect power.

Make sure to disconnect the product’s power cord before replacing a blown fuse. Always

replace the blown fuse with another of the same type and rating.

Power Linking

The Legend™ 412Z supports power linking. You can power link up to 9 products at 120 V; up to

15 at 208 V; or up to 17 at 230 V.

This product comes with a power input cord. Power linking cables are available from Chauvet

for purchase.

DMX Linking

You can link the Legend™ 412Z to a DMX controller using a standard DMX serial connection. If

using other DMX compatible products with the Legend™ 412Z, you can control each

individually with a single DMX controller.

DMX Modes

The Legend™ 412Z uses the standard DMX data connection for the 15-, 27-, 31-, and

34-channel DMX modes.

• Refer to the Introduction chapter for a brief description of these modes.

• Refer to the Operation chapter to learn how to configure the Legend™ 412Z to work in

these modes.

• The DMX Values section provides you with detailed information regarding the DMX modes.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comments to this Manuals

No comments

Chauvet Legend 412 User Manual Page 10

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Legend 412