Setup
Legend™ 412Z User Manual Rev. 4 -7-
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
• When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes
.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications
for the weight-bearing requirements of this
product.
• When hanging this product, always secure to a fastening device using a safety cable.
The Legend™ 412Z comes with a double-yoke bracket to which you can either attach mounting
clamps for hanging or simply use as a floor stand. You must supply your own mounting clamps.
Make sure the clamps are capable of supporting the weight of this product. U
se at least one
mounting point per product.
Mounting Diagram
When using only one mounting clamp with this fixture, you must use a clamp with a
captive bolt to prevent accidental loosening.
Comments to this Manuals