Chauvet Nexus User Manual download pdf (Page 16)

Setup

-14- Nexus™ Aw 7x7 User Manual Rev. 2

Mounting

Orientation

Rigging

Mounting

Diagram With

Affinity™ Rig Kit

Before mounting the Nexus™ Aw 7x7, review the Safety Notes section, and read and follow

the guidelines below.

• Mount so there is access to the control panel.

• Mount in a way that allows ventilation around the product.

• Do not mount near flammable materials as indicated in the Safety Notes

section.

• Do not mount in rain, high humidity, or extreme temperature changes.

• Make sure that the mounting structure can support the weight of the Nexus™ Aw 7x7

products. See Technical Specifications

for information on weight.

• Always use safety cables.

Nexus™ Aw 7x7 panels are hung in vertical rows and connected horizontally.

Nexus™ Aw 7x7 panels are rigged using the CHAUVET® Affinity™ Rig Kit, or a clamp that is

capable of supporting the weight of the panels, both of which are sold separately. The Rig Kit

can bear the weight of 16 panels, in 1 column of 16, or 2 columns of 8. The rig kit has 5 holes

for 2 compatible bolts and works with most standard truss clamps. The mounting clamp can

bear the weight of 4 panels hung in a single column. The mounting clamp has one hole for 1

compatible bolts and fits most standard truss.

The coffin locks on the top and bottom of the Nexus™ Aw 7x7 panels connect the tops and

bottoms, and bear the weight, of the panels. The bolt-locking connectors on the sides connect

the panels and align the pixels into rows. They cannot bear the weight of the panels.

The locking bolt connectors on the sides of the Nexus™ Aw 7x7 panels is not load

bearing. Do not hang the panels sideways.

Connect Up To 16 panels

in 2 columns of 8

Connect Up To 16 panels

in 1 column of 16

Rig Kit Attached

To 2 Panels

Rig Kit Attached

To 1 Panel

Coffin Locks

Locking Bolt

Connectors

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 40 41

No comments

Chauvet Nexus User Manual Page 16