Chauvet SM-80 User Manual download pdf (Page 6)

3. SETUP

Snow Fluid

Before connecting this unit to the mains power supply for the first time you must first fill the fluid

tank with snow fluid and attach the sock to the front of the unit.

Disconnect the power cord before replacing a fuse and always

replace with the same type fuse.

Fuse Replacement

The fuse is located

inside this

compartment.

Remove using a flat

head screwdriver.

FUSE

With a flat-head screwdriver, unscrew the fuse

holder from its housing. Remove the damaged

fuse from its holder and replace with exact

same type fuse. Screw the fuse holder back in

its place and reconnect power.

Mounting

ORIENTATION

The snow machine must be used in a horizontal position sitting on a level surface or it may be

mounted using the bracket provided. Ensure that the snow is not shooting directly at anyone’s face.

Whatever method of installation you choose, the snow machine must not have more than a 15 degree

angle of inclination (tilt).

RIGGING

Hanging Clamp

It is important never to obstruct the fan or vents pathway. Mount the

fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the

fixture by loosening both knobs and tilting the fixture. After finding the

desired position, retighten both knobs.

• When selecting installation location, take into consideration lamp

replacement access and routine maintenance.

• Safety cables should always be used.

Note!

Clamp is sold separatel

• Never mount in places where the fixture will be exposed to rain, high

humidity, extreme temperature changes or restricted ventilation.

SM-80 User Manual 6 2006-12-13/15:33

1 2 3 4 5 6 7 8 9

No comments

Chauvet SM-80 User Manual Page 6