COLORpalette™ User Manual 11 2010-01-26/15:01
Menu Values
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
Red (static)
Green (static)
Blue (static)
Yellow (static)
Magenta (static)
Cyan (static)
White (sound-active)
Auto/Sound Mode 1
Auto/Sound Mode 2
Auto/Sound Mode 3
Auto/Sound Mode 4
Auto/Sound Mode 5
Auto/Sound Mode 6
Auto/Sound Mode 7
Auto/Sound Mode 8
Auto/Sound Mode 9
Auto/Sound Mode 10
Auto/Sound Mode 11
Auto/Sound Mode 12
Auto/Sound Mode 13
Auto/Sound Mode 14
Auto/Sound Mode 15
Auto Mode 1
Auto/Sound Mode 16
Strobe (Static Colors Only)
Solid On
Strobe (Slow > Fast)
Sound-active Strobing
Auto Run Delay (Auto/Sound Modes Only)
Never Auto run
Time Delay (Long > Short)
No Delay
Menu Functions
Auto Mode – Stand-alone: Sets the fixture to Master status for
Master-Slave operation and the built in programs will be
triggered by the sound. No data link is required; all fixtures
can be set to this mode for Stand-alone operation.
DMX: The fixture will be controlled by a DMX signal coming
from a DMX controller. The starting address must be selected,
and can be set using the up and down buttons.
Strobe Mode: Sets the fixture to strobe the selected color.
This setting is only available when the unit is set to display
a static color in standalone mode (A001-A007).
Auto Run Delay: If the unit does not trigger with sound within
a certain time period, it can automatically enter auto mode.
This setting controls the time delay before entering auto
mode. Note that auto mode is cancelled as soon as the unit
triggers with sound.
Comments to this Manuals