Chauvet Mega Moon User Manual download pdf (Page 9)

Mega Moon™ User Manual 9 9/16/2010 4:11 PM

4. OPERATING INSTRUCTIONS

Operation Modes

The fixture may be operated on stand-alone (sound activated), Master/Slave Mode or DMX Mode.

Stand-Alone Mode (Sound-Active)

This mode allows a single fixture to run to the beat of the music, or the fixture will change

automatically in Auto Mode.

1) Set the DIP switches position to Sound Active or Auto Mode.

Mode DIP switches

Master sound-active 1~10 = Off

2) The fixture will react to the low frequencies of music via the internal microphone in Sound Active

mode.

3) Use the audio sensitivity knob on the back of the fixture to make the fixture more or less

sensitive in Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity;

turning the knob clockwise increases the sensitivity.

Note: To use the fixture in automatic (without the sound trigger), you must use a DMX controller.

Master/Slave Mode (Sound)

This mode will allow you to link up to 32 fixtures together without a controller.

1) Use standard DMX cables to daisy chain your fixtures together via the DMX connector on the

rear of the fixtures. (For longer cable runs, we suggest a terminator at the output of the last

fixture).

2) Choose a fixture to function as the Master. Turn DIP switches to the Master position on the

fixture. The Master fixture must be the first fixture in line.

3) Please see the DIP switches settings for Stand-Alone Mode (described above) to set the fixture

to the Master setting of your choice.

4) Turn the DIP switches to the Slave position on the Slave fixture, and they will react the same as

the Master.

Mode DIP switches

Slave 1, 10 = On

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Chauvet Mega Moon User Manual Page 9