Chauvet Obsession LED 2.0 User Manual download pdf (Page 9)

Obsession™ LED 2.0 User Manual (Rev. 03) Page 9 of 20

Mounting

Before mounting the product, read and follow the safety recommendations indicated in

the Safety Notes section (page 2 of this manual).

Orientation

The Obsession™ LED 2.0 may be mounted in any position; however, make sure

adequate ventilation is provided around the product.

Rigging

 Before deciding on a location for the product, always make sure there is easy access

to the product for maintenance and programming purposes.

 Make sure that the structure onto which you are mounting the product can support

the product’s weight. Please see the Technical Specifications section of this manual

for weight information.

 When mounting the product overhead, always use a safety cable. Mount the product

securely to a rigging point, whether an elevated platform or a truss.

 When rigging the product onto a truss, you should use a mounting clamp of

appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for

this purpose.

 When power linking multiple products, you must always consider the length of the

power linking cable and mount the products close enough for the cable to reach.

 The bracket adjustment knobs allow for directional adjustment when aiming the

product to the desired angle. Only loosen or tighten the bracket knobs manually.

Using tools could damage the knobs.

MountingDiagram

Bracket

AdjustmentKnob

MountingBracket

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Chauvet Obsession LED 2.0 User Manual Page 9