Chauvet Scorpion RGY Operations Instructions download pdf (Page 13)

Scorpion™ Storm FX User Manual 13 08/10/2011

This drawing provides a

general illustration of the

DMX Input/Output panel of

a lighting fixture.

Universal DMX

Controller

Continue the link

Master Slave Slave

Often, the setup for Master-Slave and

Standalone operation requires that the

first fixture in the chain be initialized for

this purpose via DIP switches.

Secondarily, the fixtures that follow may

also require a slave setting. Please

consult the “Operating Instructions”

section in this manual for complete

instructions for this type of setup and

configuration.

3-Pin to 5-Pin Conversion Chart

If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-

pin adapter. CHAUVET Model No: DMX5M, or DMX5F.

The chart below details a proper cable conversion.

3-P

IN TO

5-P

ONVERSION

HART

Conductor 3 Pin Female (Output) 5 Pin Male (Input)

Ground/Shield Pin 1 Pin 1

Data ( - ) signal Pin 2 Pin 2

Data ( + ) signal Pin 3 Pin 3

Not used Pin 4

Not used Pin 5

Setting up a DMX Serial Data Link

1. Connect the (male) 3-pin connector side of the

DMX cable to the output (female) 3-pin connector

of the controller.

2. Connect the end of the cable coming from the

controller which will have a (female) 3-pin

connector to the input connector of the next fixture

consisting of a (male) 3-pin connector.

3. Then, proceed to connect from the output as

stated above to the input of the following fixture

and so on.

CHAUVET Certified DMX Data Cables

Order Code Description

DMX1.5 DMX Cable 1.5 m/4.9 ft

DMX4.5 DMX Cable 4.5 m/14.8 ft

DMX10 DMX Cable 10 m/32.8 ft

Master/Slave Fixture Linking

1. Connect the (male) 3-pin connector side of the DMX cable to the output (female) 3-pin connector

of the first fixture.

2. Connect the end of the cable coming from the first fixture which will have a (female) 3-pin connector

to the input connector of the next fixture consisting of a (male) 3-pin connector. Then, proceed to

connect from the output as stated above to the input of the following fixture and so on.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Chauvet Scorpion RGY Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Projectors Chauvet Scorpion RGY