Chauvet Scorpion RGY Operations Instructions download pdf (Page 16)

Scorpion™ Storm FX User Manual 16 08/10/2011

Setting the Starting Address

This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start

address" from 1 to 512. A fixture requiring one or more channels for control begins to read the data on the

channel indicated by the start address. For example, a fixture that uses 6 DMX channels and was addressed

to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose

start addresses so that the channels used do not overlap, and note the start address selected for future

reference.

If this is your first time addressing a fixture using the DMX-512 control protocol, we suggest reviewing the

Appendix Section and reading the “DMX Primer”. It contains very useful information that will help you

understand its use.

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Chauvet Scorpion RGY Operations Instructions Page 16