Chauvet Scorpion RGY User Manual download pdf (Page 14)

Page 14 of 20 Scorpion™ GVC/RVM/RGY User Manual (Rev. 11)

Configuration

DMX Mode

Setting this product to operate in DMX mode will allow you to control it with a DMX

controller.

1. Connect this product to a suitable power outlet.

2. Turn this product on.

3. Connect a DMX cable from the DMX output of the DMX controller to the

DMX input socket of this product.

Starting Address

When selecting a starting DMX address, you must always consider the number of

DMX channels assigned to the selected DMX mode. If you choose a starting address

that is too high, you could restrict the access to some of the channels of the DMX

mode in use.

The Scorpion™ GVC/RVM/RGY products use ten DMX channels, which defines the

highest configurable address to 503.

If you are not familiar with the DMX protocol, you may refer to the “DMX Primer”

section in the “Technical Information” chapter.

To select the starting address, do the following:

1. Press <MENU> repeatedly until the current starting address (001 to 503)

shows blinking on the display.

2. Use <UP> or <DOWN> to select a different starting address (001~503).

3. Press <ENT> (the new starting address will show solid on the display).

Standalone Modes

Never connect a product that is operating in any standalone mode,

whether Static, Automatic, or Sound to a DMX string connected to a DMX

controller. This is because products in standalone mode may transmit

DMX signals that could interfere with the DMX signals from the

controller.

Setting this product to operate in DMX mode will allow you to control it without a DMX

controller.

1. Connect this product to a suitable power outlet.

2. Turn this product on.

Sound Mode

To enable the Sound mode, do the following:

1. Press <MENU> repeatedly until the active option of the Auto/Sound branch

(AF1 to rdM) appears on the display.

2. Use <UP> or <DOWN> to select a sound triggered program (So1~SoM).

3. Press <ENT> (the new sound program will show solid on the display).

4. Turn the music on.

5. Press <MENU> repeatedly until the active option of the Sound Sensitivity

branch (S 0 to S 9) shows blinking on the display.

6. Use <UP> or <DOWN> to select the sensitivity level (S 0~S 9).

7. Press <ENT> (the new sound sensitivity will show solid on the display).

The product will only respond to the low frequencies of the music (bass

and drums).

NOTE: There are individual differences in responses to music between

Scorpions™ set to the same Sound-active mode (S0~S9). To ensure an

in-

unison effect from multiple lasers, link them together in Master/Slave

mode. The slave products will operate according to the master unit’s

Sound-active setting.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Chauvet Scorpion RGY User Manual Page 14

Comments to this Manuals

Related products and manuals for Projectors Chauvet Scorpion RGY