Pro-D6 User Manual 8 Rev. 4
User Configurations
To set the DMX address
1) Select “DMX address” by pressing <Menu>, then the <Up/Down> buttons, until the display
reads correctly.
2) Press <Menu> to reach the second step of the addressing menu.
3) Use the <Up/Down> buttons to select Block or Single mode.
4) Press the <Menu> button.
5) Use the <Up/Down> buttons to select the correct value. Once you are satisfied with your input,
press <Menu>to confirm your selection.
6) Pressing the <Esc> button will allow you to back out of this menu. This is useful if you wish to
select the option for setting each channel to a different dmx address.
Comments to this Manuals