Chauvet INTIMIDATOR 200 User Manual download pdf (Page 9)

Intimidator™ Scan LED 300 User Manual Rev. 6 Page 9 of 17

4. OPERATION

Control Panel

Operation

To access the control panel functions, use the four buttons located underneath the

display. Please refer to the Product Overview to see the button locations

on the control

panel.

Button Function

Press to find an operation mode or to back out of the current menu

option

<UP>

Press to scroll up the list of options or to find a higher value

<DOWN>

Press to scroll down the list of options or to find a lower value

<ENTER>

Press to activate a menu option or a selected value

Menu Map

Menu Programming Steps Description

DMX Mode

d001

d001–512

DMX starting address

Standalone

Mode

NASL

SLAu

SoN

Standalone: Slave receive mode

NStS

SrUn

Standalone: Sound-Active

NAFA

FASt

Standalone: Auto Program

Pan Invert PAN rPAN

Pan invert

Tilt Invert tit rtit

Tilt invert

Display Invert diS rdiS

Invert the display

DMX Personality 11CH

8CH

8-channel DMX personality

11CH

11-channel DMX personality

Reset rESt

Reset all motors to correct any errors

with motors misaligning during operation

Load Default LoAd

Revert all settings back to the factory

default

Configuration

(DMX)

Set the product in DMX mode to control with a DMX controller.

1. Connect the product to a suitable power outlet.

2. Turn the product on.

3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input

socket on the product.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels

the selected DMX mode uses. If you

choose a starting address that is too high, you could

restrict the access to some of the product’s channels.

The Intimidator™ Scan LED 300 uses up to 11 DMX channels in its 11-Channel DMX

mode, which defines the highest configurable address to 502.

If you are not familiar with the DMX protocol,

download the DMX Primer from the

CHAUVET® website.

To select the starting address, do the following:

1. Press <MODE/ESC> repeatedly until d(001–512) shows on the display.

2. Using <UP> and <DOWN>, select the starting address d(001–512).

3. Press <MODE/ESC> until one of the DMX personalities appears on the LED screen

(8CH, 11CH). The most recent DMX personality selected will appear.

4. Use <UP> and <DOWN> to change the personality.

5. Press <ENTER>.

If you are not familiar with DMX, download the DMX Primer from

www.chauvetlighting.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Chauvet INTIMIDATOR 200 User Manual Page 9

Comments to this Manuals

Related products and manuals for Stroboscopes & disco lights Chauvet INTIMIDATOR 200