Chauvet Q-Spot 360-LED User Manual download pdf (Page 6)

Before you Begin

Q-Spot 260-LED User Manual Rev. 01d -2- April 7, 2010

Safety

Notes

Please read the following notes carefully because they include important safety

information about the installation, usage and maintenance of this product.

It is important to read all these notes before starting to work with this product.

There are no user serviceable parts inside the Q-Spot 260-LED. Any reference to

servicing this unit you may find from now on in this User Manual will only apply

to properly CHAUVET® certified technicians. Do not open the housing or

attempt any repairs unless you are one of them.

Please refer to all applicable local codes and regulations for proper installation

of the Q-Spot 260-LED.

Keep this manual for future consultation. If you sell the Q-Spot 260-LED to

another user, make sure that they also receive this manual.

Personal

Safety

• Avoid direct eye exposure to the light source while the fixture is on.

• Always disconnect the Q-Spot 260-LED from its power source before servicing.

• Always connect the Q-Spot 260-LED to a grounded circuit to avoid the risk of

electrocution.

Mounting

and Rigging

• This product is for indoor use only! To prevent risk of fire or shock, do not expose

this product to rain or moisture.

• Make sure there are no flammable materials close to the fixture(s) while operating.

• When hanging this fixture, always secure it to a fastening device using a safety

cable (not provided).

Power and

Wiring

• Always make sure that you are connecting the Q-Spot 260-LED to the proper

voltage, as per the specifications in this manual or on the product’s sticker.

• Never connect the Q-Spot 260-LED to a dimmer pack.

• Make sure that the power cable is not cracked, crimped or damaged.

• Never disconnect the fixture by pulling or tugging on the power cable.

Operation

• The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the

fixture at a higher temperature.

• In case of a serious operating problem, stop using this product immediately!

In the unlikely event that your Q-Spot 260-LED may require service, please

contact CHAUVET® Technical Support.

Expected LED

Lifespan

LEDs gradually decline in brightness over time, mostly because of heat. Packaged in

clusters, LEDs exhibit higher operating temperatures than in ideal or singular optimum

conditions. For this reason, using all color LEDs at their fullest intensity significantly

reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be of 40,000 to

50,000 hours. If extending this lifespan expectancy is vital, lower the operational

temperature by improving ventilation and reducing the external temperature, as well

as limiting the overall projection intensity

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Comments to this Manuals

No comments

Chauvet Q-Spot 360-LED User Manual Page 6

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Q-Spot 360-LED