Chauvet DMX-50A User Manual download pdf (Page 10)

Operating Instructions

DMX-50A User Manual 10

Revised: 2006-04-24 15:26:16

REVERSE CHANNEL OUTPUT

Action 

1) Press and hold FINE & MODE buttons

together (1) time to access the channel

assignment mode then press the

SCANNER button.

2) Move the FADE TIME fader until you arrive

at the controller channel you wish to alter.

3) Move the SPEED fader all the way up until

N changes to Y.

4) Press and hold FINE & MODE buttons (2)

times to exit.

Notes



You can permanently reverse the output of any given

channel on the controller.

FADE TIME ASSIGN

You can choose whether the board’s fade time during scene execution is implemented broadly to all

output channels or only to the Pan & Tilt movement channels. This is relevant because often you will

want gobos and colors to change quickly while not affecting the movement of the light.

Action 

1) Turn OFF the controller.

2) Hold the MODE and TAP DISPLAY buttons

simultaneously.

3) Turn ON the controller.

4) Press the TAP DISPLAY button to toggle

between the two modes. Either ALL CH (all

channels) or ONLY X/Y (Pan & Tilt only)

5) Press MODE and TAP DISPLAY to save

settings. All LEDS will blink to confirm.

Notes



ALL CH: All channels

ONLY X/Y: Only Pan & Tilt

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Chauvet DMX-50A User Manual Page 10