Chauvet DMX-50A User Manual download pdf (Page 17)

Operating Instructions

DMX-50A User Manual 17

Revised: 2006-04-24 15:26:16

Scene Programming (Steps)

INSERT A SCENE

Action 

1) Press and hold the PROGRAM button to

enter programming mode.

2) Press the desired CHASE button.

3) Press the TAP DISPLAY to switch the LCD

display to steps view.

4) Use the BANK UP/DOWN buttons to

navigate steps and locate the insert point of

the new scene. The display will read the

step number.

5) Press MIDI/REC button to prepare the

insert.

6) Use the BANK UP/DOWN button to locate

the SCENE.

7) Press the SCENE button that corresponds

to the scene to be inserted.

8) Press MIDI/REC button to insert the scene.

All LEDs will blink.

Notes



I.e. To insert a scene between Steps 05 and 06

navigate using BANK buttons until the display reads

STEP05.

COPY A SCENE

Action 

1) Press and hold the PROGRAM button to

enter programming mode.

2) Select the BANK that contains the scene to

be copied using the BANK UP/DOWN

buttons.

3) Press the SCENE button that corresponds

to the scene to be copied.

4) Press MIDI/REC button to copy the scene.

All LEDs will blink.

5) Select the destination BANK that contains

the scene memory to record onto using the

BANK UP/DOWN buttons.

6) Press the desired SCENE button to

complete copy. All LEDs will blink.

Notes



DELETE A SCENE

Action 

1) Press and hold the PROGRAM button to

enter programming mode.

2) Select the BANK that contains the scene to

be deleted by using the BANK UP/DOWN

buttons.

3) Press and hold the AUTO DEL button.

4) Press the SCENE button that corresponds

to the scene you want to delete. All LEDs

will blink.

Notes



When deleting a scene the physical location is not

removed, however, all 240 DMX channels available

to the scene will be set to value 0.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments