Chauvet DMX-50A User Manual download pdf (Page 19)

Operating Instructions

DMX-50A User Manual 19

Revised: 2006-04-24 15:26:16

Midi Operation

The controller will only respond to MIDI commands on the MIDI channel which it is set to full stop. All

MIDI control is performed using Note on commands. All other MIDI instructions are ignored. To stop a

chase, send the blackout on note.

Action 

1) Press and hold the MIDI/REC button for

about 3 seconds.

2) Select the MIDI control channel (1~16) via

the BANK UP/DOWN buttons to set.

3) Press and hold the MIDI/REC button for 3

seconds to save settings.

4) To release MIDI control, press any other

button except the BANK buttons during

step 2.

Notes



This is the Channel that the controller will receive

MIDI note commands.

MIDI NOTE FUNCTION (TURN ON/OFF)

00 to 07

Scenes 1~8 in BANK 1

08 to 15

Scenes 1~8 in BANK 2

16 to 23

Scenes 1~8 in BANK 3

24 to 31

Scenes 1~8 in BANK 4

32 to 39

Scenes 1~8 in BANK 5

40 to 47

Scenes 1~8 in BANK 6

48 to 55

Scenes 1~8 in BANK 7

56 to 63

Scenes 1~8 in BANK 8

64 to 71

Scenes 1~8 in BANK 9

72 to 79

Scenes 1~8 in BANK 10

80 to 87

Scenes 1~8 in BANK 11

88 to 95

Scenes 1~8 in BANK 12

96 to 103

Scenes 1~8 in BANK 13

104 to 111

Scenes 1~8 in BANK 14

112 to 119

Scenes 1~8 in BANK 15

120

Chase 1

121

Chase 2

122

Chase 3

123

Chase 4

124

Chase 5

125

Chase 6

126

BLACKOUT

Data Transfer

It is possible to transfer the programs stored in one DMX-50A controller to another. Connect from the

DMX output of the programmed controller to the DMX input of the other.

Action 

1) Source unit: Turn unit Off, press and hold

SCANNER buttons 2, 3 and SCENE button

1 then turn unit back On.

2) Destination unit: Turn unit Off, press and

hold SCANNER buttons 8, 9 and SCENE

button 2 then turn unit back On.

3) Both units are now ready to transmit and

receive. Press SCENE buttons 7 & 8

simultaneously on Source unit to begin

transmission.

Notes



The display should show TRANSMIT, this indicates it

is ready to transmit data.

The display should show RECEIVE, this indicates it is

ready to receive data transmission.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Chauvet DMX-50A User Manual Page 19

Comments to this Manuals

Related products and manuals for DJ controllers Chauvet DMX-50A