Chauvet Colordash Par-Tri User Manual download pdf (Page 11)

Setup

COLORdash™ Par-Tri User Manual Rev. 03 -7-

Mounting

Before mounting this fixture, read and follow

the safety recommendations indicated in

the Safety Notes section (page 2 of this manual).

Orientation

Always mount this fixture in any safe position while making sure that there is adequate

room around it for ventilation, configuration, and maintenance.

Make sure to mount this fixture away from any flammable material as indicated in the

Safety Notes section.

Rigging

CHAUVET® recommends following the general guidelines below when mounting the

COLORdash™ Par-Tri.

• When selecting an installation location, consider ease of access to the fixture for

operation, programming adjustments, and routine maintenance.

• Never mount the fixture in places where rain, high humidity, extreme temperature

changes, or restricted ventilation may affect it.

• If hanging this fixture, make sure that the location where you are mounting the

fixture can support its weight. Please see the Technical Specifications section of this

manual for the weight requirement of this fixture.

Procedure

The COLORdash™ Par-Tri comes with a double bracket yoke

to which you can attach

one or two “C” or “O” clamps. The yoke serves also as a floor mount support. You must

supply your own “C” or “O” clamps as well as your own safety cable. Always make sure

that make sure that the clamps and mounting points

are capable of supporting the

weight of this fixture. CHAUVET suggests using two clamps per fixture.

Product Mounting

Diagram

C clamp

(not included)

Floor Mounting

Overhead Mounting

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

No comments

Chauvet Colordash Par-Tri User Manual Page 11