Chauvet Nexus User Manual download pdf (Page 15)

Setup

Nexus™ 4x4 User Manual Rev. 4 -13-

Mounting

Orientation

Rigging

Before mounting the Nexus™ 4x4, review the Safety Notes section. Read and follow the

guidelines below for mounting the Nexus™ 4x4.

• When selecting a desired location and before installation, consider easy access to this

product for operation, programming adjustments, and routine maintenance.

• Mount in a way that allows adequate ventilation around the product.

• Do not mount near flammable materials as indicated in the Safety Notes

section.

• Do not mount where there is rain, high humidity, or extreme temperature change.

• Make sure that the mounting structure can support the weight of the Nexus™ 4x4. See

Technical Specifications

for information on weight.

• Always secure product to a fastening device using a safety cable.

The Nexus™ 4x4 can be mounted in any orientation as long as each individual product is

secured through the mounting bracket. Always mount the Nexus™ 4x4 securely and use

safety cables.

The Nexus™ 4x4 includes a hanging bracket with holes for M12-compatible bolts. There are

coffin locks on all four edges of the Nexus™ 4x4 that are used for aligning the products in an

array. The coffin locks should not carry the weight of the Nexus™ 4x4. Each Nexus™ 4x4

must be rigged to hold its own weight using its hanging bracket and at least one rigging point

per panel.

The coffin locks of the Nexus™ 4x4 panels are not load-bearing connectors.

The hanging bracket can be bolted directly onto a surface or can be connected to truss with

clamps. For the complete line of CHAUVET® clamps, see the Chauvet website at

www.trusst.com/productcategory/accessories-clamps/

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

No comments

Chauvet Nexus User Manual Page 15