Chauvet Nexus User Manual download pdf (Page 24)

Operation

-22- Nexus™ 4x4 User Manual Rev. 4

The Connected

Devices Window

Part 2: Test

Network

Connectivity

It can take up to 20 seconds for all the products to populate the list. The devices display in

different colors for different reasons, which are as follows:

Colors and Activity

Explanation

Black with an ID number and IP

address

There is connectivity and everything is working properly, but

the device is not yet mapped.

Green with an ID number and IP

address

There is connectivity and everything is working properly, and

the device is mapped.

Black to red with no IP address during

initial population

The King-Net™ Mapper could not find an IP address for the

device, most likely because the system is using an Ethernet

switch instead of an Ethernet hub.

Black to red after initial population

The connectivity has been lost.

4. Select the Output dropdown icon from the tool bar at the top of the Kling-Net Mapper

screen. One of the options will be Test Pattern.

5. Select Test Pattern. The image to the right of the icon is a small screen, indicating that

Test Pattern is the current mode.

6. Select the icon to the right of the Output dropdown icon. One of the options will be

Flashing Output Selection.

7. Select Flashing Output Selection. The icon is a faded green square with an arrow,

indicating that a flashing green light is the current test pattern.

8. Left click once on an LED display product. The product flashes green.

9. Repeat Step 8 for every product in the list.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

No comments

Chauvet Nexus User Manual Page 24